Vernier Calipers - Blowout Sale! Save up to 77%


Blowout Sale! Up to 77% off on Vernier Calipers at Chat Central Huron. Top brands include STAR USA, Mitutoyo, Starrett, & Fowler. Hurry! Limited time offers. Offers valid only while supplies last.



Centerline Gage Sets (Meda Series 215) 2.750'' / .500'' Dia. / .188 Jaw Thick. / For 10'', 12'' Calipers
Centerline Gage Sets (Meda Series 215) 2.750" / .500" Dia. / .188 Jaw Thick. / For 10", 12" Calipers
By STAR USA
In Stock
$23.28

mpn: 26740187035,

4.2 out of 5 stars with 36 reviews
* Designed for dial, vernier and digital calipers to measure centerline distance. * Sold in pairs, these gages quickly adapt to most calipers. * Centerline measurements read in exact figures; no adding or subtracting is required. * The 60 degree conical probe fits snugly into holes. Takes guesswork away from center distance measurements or to edge from a hole. * Constructed of high quality alloy steel hardened to 50 RC, black oxide finished. * Outside diameter and cone ground for accuracy. *


Mitutoyo 530-119 Vernier Caliper, Stainless Steel, Inch/Metric, 0-12'' Range, +/-0.0015'' Accuracy, 0.001'' Resolution
Mitutoyo 530-119 Vernier Caliper, Stainless Steel, Inch/Metric, 0-12" Range, +/-0.0015" Accuracy, 0.001" Resolution
By Mitutoyo
In Stock
$232.00
$140.94
You Save: 39%

mpn: 530-119, ean: 4946368110226,

4.9 out of 5 stars with 71 reviews
The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves


Starrett 123Z-12 Master Vernier Caliper
Starrett 123Z-12 Master Vernier Caliper
By Starrett
In Stock
$902.00
$687.69
You Save: 24%

mpn: 123Z-12, ean: 0049659505269,

4.9 out of 5 stars with 75 reviews
The Starrett 123Z-12 master vernier caliper has a 12'' measuring range with 0.001'' graduations, and two-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, grooves, and tube thicknesses. The open-face design allows vernier scales to be located on each side of the gauge for inside and outside measurements. A fine-adjustment screw and tight fitting sides ensure accurate measurements A locking screw secures the measurement tightly in place for accurate readings. A


Fowler 52-085-024 Stainless Steel Master Vernier Caliper with Stain Chrome Finish, 24''/600mm Measuring Range, 0.001''/0.02mm Graduation
Fowler 52-085-024 Stainless Steel Master Vernier Caliper with Stain Chrome Finish, 24"/600mm Measuring Range, 0.001"/0.02mm Graduation
By Fowler
In Stock
$370.70
$180.00
You Save: 51%

mpn: 52-085-024-0, ean: 0646795102132,

4.1 out of 5 stars with 7 reviews
The Fowler Full Warranty 52-085-024-0 master inch/metric vernier caliper measures in inches and metric, has a 0.001''/0.02mm graduation, and two-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, and grooves. Long jaws provide access to hard-to-reach areas and improved accuracy over longer measuring ranges. The open-face design allows both vernier scales to be located on one side of the gauge for both inch and metric measurements. A fine-adjustment screw ensures


Starrett 1025-6 Slide Caliper, Stainless Steel, Nib Style Jaw, 0-6'' Range, +/-0.003'' Accuracy, 0.015625'' Resolution
Starrett 1025-6 Slide Caliper, Stainless Steel, Nib Style Jaw, 0-6" Range, +/-0.003" Accuracy, 0.015625" Resolution
By Starrett
In Stock
$231.00

mpn: 1025-6, ean: 0094713866596,

4.2 out of 5 stars with 8 reviews
The Starrett 1025-6 stainless steel pocket slide caliper fits easily in a shop coat pocket and is precise to 1/64” for quick yet precise measurements. Readings are made directly from two lines marked “in” and “out” on one side of the caliper stock. The outside range is 0 to 4-3/4” while the inside range is 1/4 to 5”. The back of the caliper stock has an inch scale to allow the caliper to be used as a steel rule as well, for easy and fast estimation of rough measurements. The


MITUTOYO Brand Vernier Caliper with fine adjustment 200mm / 8'' Model: 532-120.Genuine Mitutoyo product Made in Japan
MITUTOYO Brand Vernier Caliper with fine adjustment 200mm / 8" Model: 532-120.Genuine Mitutoyo product Made in Japan
By Mitutoyo
SKU: #9157548
In Stock
$187.60
$131.32
You Save: 30%

sku: 9157548, mpn: 532-120, ean: 5053252776365,

4.0 out of 5 stars with 61 reviews
Mitutoyo 532-120 NM8P IN.


Mitutoyo 160-102 Vernier Caliper, Stainless Steel, Nib Style Jaw, 0-24'' Range, +/-0.002'' Accuracy, 0.001'' Resolution
Mitutoyo 160-102 Vernier Caliper, Stainless Steel, Nib Style Jaw, 0-24" Range, +/-0.002" Accuracy, 0.001" Resolution
By Mitutoyo
In Stock
$890.00
$648.60
You Save: 27%

mpn: 160-102, ean: 4946368024240,

4.4 out of 5 stars with 44 reviews
The Mitutoyo 160 series vernier caliper has a single set of nib-style jaws with rounded measuring faces for measurement in inch units of inner dimension (ID) and outer dimension (OD), and a fine-adjustment carriage for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in inch units. It has two-way measurement capability: outer


Mitutoyo 160-124 Vernier Caliper, Stainless Steel, Nib Style Jaw, 0-12'' Range, +/-0.0015'' Accuracy, 0.001'' Resolution
Mitutoyo 160-124 Vernier Caliper, Stainless Steel, Nib Style Jaw, 0-12" Range, +/-0.0015" Accuracy, 0.001" Resolution
By Mitutoyo
In Stock
$483.00
$450.99
You Save: 7%

mpn: 160-124, ean: 0603908000860,

4.6 out of 5 stars with 107 reviews
The Mitutoyo 160 series vernier caliper has a single set of nib-style jaws with rounded measuring faces for measurement in inch units of inner dimension (ID) and outer dimension (OD), and a fine-adjustment carriage for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in inch units. It has two-way measurement capability:


Fowler Full Warranty 54-101-300-1 Stainless Steel Frame Xtra-Value Cal Electronic Caliper, 12'' Maximum Measurement
Fowler Full Warranty 54-101-300-1 Stainless Steel Frame Xtra-Value Cal Electronic Caliper, 12" Maximum Measurement
By Fowler
In Stock
$101.47
$94.99
You Save: 6%

mpn: 54-101-300-1, ean: 0646795135338,

4.9 out of 5 stars with 26 reviews
The Fowler 541013001 Xtra-Value Cal Electronic Caliper is constructed of stainless steel. Large easy to read display, direct inch/metric conversion, absolute/incremental measurement, and 4-way measuring. Includes shop-hardened case. This product has a 1 year warranty offered by Fowler High Precision. If you experience any problem contact Fowler directly for warranty claims. Dial calipers are measuring instruments commonly used for inspection in manufacturing to provide the precise measurements


Mitutoyo 534-120 Vernier Caliper, Steel, Nib Style, Long Jaw, 0-40'' Range, +/-0.004'' Accuracy, 0.001'' Resolution
Mitutoyo 534-120 Vernier Caliper, Steel, Nib Style, Long Jaw, 0-40" Range, +/-0.004" Accuracy, 0.001" Resolution
By Mitutoyo
In Stock
$1,600.00
$372.40
You Save: 77%

mpn: 534-120, ean: 4946368111001,

4.2 out of 5 stars with 123 reviews
The Mitutoyo 534 series long jaw vernier caliper has two-way measurement capability for outer diameter (OD) and inner diameter (ID) in standard inch units, with long jaws for performing hard to reach measurements and a fine adjustment carriage to precisely control upper scale movement. The calipers have a dual vernier scale, with both the upper and lower scales measuring in inches, and each graduated to 0.001''. The scales are raised to slide easily and protect the graduation markings. A


Mitutoyo 532-120 Vernier Caliper, Stainless Steel, Inch/Metric, 0-7'' Range, +/-0.0011'' Accuracy, 0.001'' Resolution
Mitutoyo 532-120 Vernier Caliper, Stainless Steel, Inch/Metric, 0-7" Range, +/-0.0011" Accuracy, 0.001" Resolution
By Mitutoyo
In Stock
$134.00
$100.00
You Save: 25%

mpn: 532-120, ean: 4946368110691,

4.5 out of 5 stars with 16 reviews
The Mitutoyo 532 series vernier caliper has a fine adjustment carriage to precisely control movement of the vernier scale, and two sets of jaws and a depth bar for four-way measurement in inch and metric units of outer dimension (OD), inner dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a


Mitutoyo 530-118 Vernier Calipers, Stainless Steel, for Inside, Outside, Depth and Step Measurements, Metric, 0''/0mm-200mm Range, +/-0.03mm Accuracy, 0.02mm Resolution, 50mm Jaw Depth
Mitutoyo 530-118 Vernier Calipers, Stainless Steel, for Inside, Outside, Depth and Step Measurements, Metric, 0"/0mm-200mm Range, +/-0.03mm Accuracy, 0.02mm Resolution, 50mm Jaw Depth
By Mitutoyo
In Stock
$131.74

mpn: 530-118, ean: 4946368110219,

4.9 out of 5 stars with 33 reviews
The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves


Mitutoyo 527-103 Vernier Depth Gauge, Caliper Type, 0-300mm Range, 0.02mm Graduation, +/-0.04mm Accuracy, With Fine Adjustment Feature
Mitutoyo 527-103 Vernier Depth Gauge, Caliper Type, 0-300mm Range, 0.02mm Graduation, +/-0.04mm Accuracy, With Fine Adjustment Feature
By Mitutoyo
In Stock
$270.00
$132.62
You Save: 51%

mpn: 527-103, ean: 0603908076223,

4.1 out of 5 stars with 81 reviews
The Mitutoyo Series 527 Vernier Depth Gauges, Some with Fine Adjustment, Caliper Type, Metric, depending on the model, have a measurement range from 0 to 150mm to 0 to 1000mm, a resolution (or smallest graduation interval) of either 0.02 or 0.05mm, with + or – 0.03 to 0.15mm of accuracy. The vernier scale provides precise measurements. Some models provide a fine adjustment screw for taking precise measurements. These gauges are made of hardened steel and the bases of the units and measuring


Mitutoyo 530-116 Vernier Caliper, Stainless Steel, 0-8'' Range, +/-0.0015'' Accuracy, 0.0078'' Resolution
Mitutoyo 530-116 Vernier Caliper, Stainless Steel, 0-8" Range, +/-0.0015" Accuracy, 0.0078" Resolution
By Mitutoyo
SKU: #504-530-116
In Stock
$124.00
$105.40
You Save: 15%

sku: 504-530-116, mpn: 530-116, ean: 0603908006848,

4.3 out of 5 stars with 117 reviews
The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with both the upper and lower scales measuring in inch units. A 14-degree vernier face angle improves visibility and helps prevent


Starrett 123Z-12 W/SLC Vernier Caliper, Steel, Nib Style Jaw, 0-12'' Range, 0.001'' Resolution
Starrett 123Z-12 W/SLC Vernier Caliper, Steel, Nib Style Jaw, 0-12" Range, 0.001" Resolution
By Starrett
In Stock
$947.00
$364.18
You Save: 62%

mpn: 123Z-12 W/SLC, ean: 0049659669275,

4.9 out of 5 stars with 38 reviews
The Starrett 123Z-12 master vernier caliper measures 0 to 12 inches with 0.001” accuracy, and comes with a mail-in card to request the standard letter of certification (SLC). Once the card has been mailed in, Starrett sends the SLC with caliper model and serial numbers, ensuring that the exact caliper purchased has met National Institute of Standards and Technology master standards. The vernier scales are longer than normal, with 50 divisions, allowing half as many bar graduations as


Centerline Gage Sets (Meda Series 215) 2.195'' / .375'' Dia. / .115 Jaw Thick. / For 4'', 6'', 8'' Calipers
Centerline Gage Sets (Meda Series 215) 2.195" / .375" Dia. / .115 Jaw Thick. / For 4", 6", 8" Calipers
By STAR USA
In Stock
$21.44

mpn: 26740137035,

4.3 out of 5 stars with 32 reviews
* Designed for dial, vernier and digital calipers to measure centerline distance. * Sold in pairs, these gages quickly adapt to most calipers. * Centerline measurements read in exact figures; no adding or subtracting is required. * The 60 degree conical probe fits snugly into holes. Takes guesswork away from center distance measurements or to edge from a hole. * Constructed of high quality alloy steel hardened to 50 RC, black oxide finished. * Outside diameter and cone ground for accuracy. *


Fowler 52-085-040 Stainless Steel Master Vernier Caliper with Stain Chrome Finish, 40''/1000mm Measuring Range, 0.001''/0.02mm Graduation
Fowler 52-085-040 Stainless Steel Master Vernier Caliper with Stain Chrome Finish, 40"/1000mm Measuring Range, 0.001"/0.02mm Graduation
By Fowler
In Stock
$711.58
$688.30
You Save: 3%

mpn: 52-085-040-0, ean: 0646795102149,

4.0 out of 5 stars with 55 reviews
The Fowler Full Warranty 52-085-040-0 master inch/metric vernier caliper measures in inches and metric, has a 0.001''/0.02mm graduation, and two-way jaws for measuring the inside diameter (ID) and outside diameter (OD) of holes, and grooves. Long jaws provide access to hard-to-reach areas and improved accuracy over longer measuring ranges. The open-face design allows both vernier scales to be located on one side of the gauge for both inch and metric measurements. A fine-adjustment screw ensures


Mitutoyo 530-114 Vernier Caliper, Stainless Steel, Inch/Metric, 0-8'' Range, +/-0.002'' Accuracy, 0.0078'' Resolution
Mitutoyo 530-114 Vernier Caliper, Stainless Steel, Inch/Metric, 0-8" Range, +/-0.002" Accuracy, 0.0078" Resolution
By Mitutoyo
In Stock
$124.00
$113.09
You Save: 9%

mpn: 530-114, ean: 4946368110189,

4.7 out of 5 stars with 21 reviews
The Mitutoyo 530 series vernier caliper has two sets of jaws and a depth bar for four-way measurement in inch and metric units of outside dimension (OD), inside dimension (ID), step, and depth, for applications where the highest accuracy is required, especially in scientific research and in industries where parts must fit exactly. The caliper has a dual vernier scale, with an upper scale measuring in inches and a lower scale measuring in millimeters. A 14-degree vernier face angle improves



Viewing Page 1 of 1

View more products in Calipers.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - chatcentralhuron.com. All Rights Reserved.