Grommets - Mega Sale! Save up to 29%


Mega Sale! Up to 29% off on Grommets at Chat Central Huron. Top brands include C.S. Osborne, C. S. Osborne & Co., AYT, & General Tools Mfg Co In. Hurry! Limited time offers. Offers valid only while supplies last.



Grommets, Plain, Black Oxide, Setting Tool Also Available (#4 1/2'' inc Plain Grommets w/ Punch & Setting Tool)
Grommets, Plain, Black Oxide, Setting Tool Also Available (#4 1/2" inc Plain Grommets w/ Punch & Setting Tool)
By C.S. Osborne
In Stock
$122.09

ean: 0756756933863,

4.3 out of 5 stars with 34 reviews
Grommet with Plain Washer #4 Brass 1/2'' Black 12 Piece Set. Made of heavy-gauge brass, assuring maximum strength and resistance against ''pulling out.'' This set includes the hole punch and setting tool These grommets can be used interchangeably with plain or teeth washers. Used properly you can expect these tools to last for many years even decades. Meets Government Specifications, MIL-G-16491F, MS-20230, NASM-16491 and NASM-20230. Government Specifications Met: MIL-G-16491F, MS-20230,


C.S. Osborne & Co. No. 216-8 - Plain Grommet Setting Die, size 8. MPN #13230
C.S. Osborne & Co. No. 216-8 - Plain Grommet Setting Die, size 8. MPN #13230
By C. S. Osborne & Co.
In Stock
$303.93

mpn: 13230, ean: 0602401916357,

4.7 out of 5 stars with 38 reviews
C.S.Osborne & Co. Grommet Setter No. 216-6 sets size 6 grommets. Osborne grommet inserting dies are numbered to correspond with standard size grommets. Grommet dies should be used with an Osborne rawhide hammer or wooden mallet, not with a steel hammer. We recommend our No. 395 rawhide hammers for this purpose.( Mallet not included ) Sets plain rim grommets and washers. Construnstructed of a malleable iron casting. Properly machined and hardened. The finest industrial grommet dies made offering


1 Ga Tinned Copper Eyelet 1/4 Inch Stud-10Pack
1 Ga Tinned Copper Eyelet 1/4 Inch Stud-10Pack
By AYT
In Stock
$34.80
$24.80
You Save: 29%

mpn: 36410, ean: 0799360878564,

4.2 out of 5 stars with 74 reviews
Tinned Copper ; Solid Electrolytic Copper Eyelets ; Wire Gauge Is Stamped On The Terminal ; Meets Ul Requirements ; Wire Gauge: 1 ; Stud Size: 1/4 Inch.Eyeletsgauge: 1; Material: Tinned Copper; Stud Size: 1/4 Inch..


144 QTY-C.S. Osborne - No.G1-0 BRASS Grommets & Plain Washers,size 0. MPN#13014
144 QTY-C.S. Osborne - No.G1-0 BRASS Grommets & Plain Washers,size 0. MPN#13014
By C. S. Osborne & Co.
In Stock
$11.24

mpn: 13014, ean: 0611138449212,

4.7 out of 5 stars with 140 reviews
144 QTY - C.S.Osborne & Co. No. G1-0 - BRASS Grommets & Plain Washers size 0 grommets. Size 0 grommets have a 1/4'' diameter hole when set in, 0.546'' out side diameter, and 0.175'' Length under flange . For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch not included and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. (Cutter,Setter and Press Not included)C.S.Osborne & Co. No. G1-0. Crafted in the


50 QTY-C.S. Osborne - No. B1-00-DULL BLACK Grommets & Washers,size 00. MPN#71884
50 QTY-C.S. Osborne - No. B1-00-DULL BLACK Grommets & Washers,size 00. MPN#71884
By C. S. Osborne & Co.
In Stock
$11.49

mpn: 71884-B, ean: 0611138447881,

4.3 out of 5 stars with 126 reviews
50 QTY- C.S.Osborne & Co. No. B1-00 - DULL BLACK Grommets & Washers size 00 grommets. Size 00 grommets have a 3/16'' diameter hole when set in, 0.460 '' out side diameter, and 0.135'' Length under flange . For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch not included and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. (Cutter,Setter and Press Not included)C.S.Osborne & Co. No. B1-00. Crafted in


C.S. Osborne G1-4 1/2'' BRASS GROMMET & PLAIN WASHER
C.S. Osborne G1-4 1/2" BRASS GROMMET & PLAIN WASHER
By C. S. Osborne & Co.
In Stock
$34.97

mpn: G1-4, ean: 0096685130224,

4.9 out of 5 stars with 70 reviews
1/2'' BRASS GROMMET & PLAIN WASHERYou will receive 144 grommets, and 144 washers. Brass. Quality tools from C.S.Osborne. Crafted in the USA, built to last..


C.S. Osborne Black Grommets & Spur Washers #B2-2 (Size 2) 144 Sets
C.S. Osborne Black Grommets & Spur Washers #B2-2 (Size 2) 144 Sets
By C.S. Osborne
In Stock
$62.00

mpn: B2-2, ean: 0747465146750,

4.9 out of 5 stars with 108 reviews
C.S. Osborne Black Rolled Rim Grommets With Spur Washers. Brass material with dull black finish grommets and washers. You will receive 144 grommets and 144 spur washers. Made in USA. Size : 2 Diameter of hole : 7/16'' 144 washer and grommets per gross Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool. Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S.


C.S. Osborne 12 Sets Nickel Plated Grommets & Spur Washers #N2-4 (9/16'' Hole)
C.S. Osborne 12 Sets Nickel Plated Grommets & Spur Washers #N2-4 (9/16" Hole)
By C.S. Osborne
In Stock
$12.99

mpn: N2-4-A, ean: 0747465144558,

4.1 out of 5 stars with 109 reviews
C.S. Osborne Set of 12 Nickel Plated Grommets And Spur Washers. Brass material with nickel finish grommets and washers. You will receive 12 grommets and 12 spur washers. Made in USA. Size : 4 Diameter of hole when set : 9/16'' Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool. Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole


General Tools 1260-0 Solid Brass Grommet Kit, 1/4-Inch
General Tools 1260-0 Solid Brass Grommet Kit, 1/4-Inch
By General Tools Mfg Co In
In Stock
$11.97

mpn: 1260-0, ean: 0038728411006,

4.1 out of 5 stars with 118 reviews
- 48 solid brass grommets 1/4 inch with setting tools. - To repair: Canvas, tarpaulins, tents, awnings, sailcloth, lawn furniture, pool covers. - Parts: Hardwood backer, hole cutter, grommets, punch, anvil, and washers. - Instructions enclosed.Great choice when you need to repair a tarp, tent or pool cover. Also be used to add additional grommets to a canvas or awning. The matched anvil and mandrel set are made from hardened steel to ensure the grommet pieces are securely and permanently


C.S. Osborne 3/16'' Grommet Setter
C.S. Osborne 3/16" Grommet Setter
By C. S. Osborne & Co.
In Stock
$18.99

mpn: 13012, ean: 0610696719317,

4.9 out of 5 stars with 110 reviews
C.S. Osborne quality grommet setting tool includes both setting tool and anvil. Allows for a perfect set every time. Made in the USA of quality steel. Great for leather work or even fabric projects.Includes setting tool with matching anvil. Made of quality steel. Perfect set every time. Sets 3/16'' grommets. Made in the USA.


C.S. Osborne 12'' Wing Divider #106-12 Measure Circles & Curves Made In USA
C.S. Osborne 12" Wing Divider #106-12 Measure Circles & Curves Made In USA
By C.S. Osborne
In Stock
$52.99

mpn: 106-12, ean: 0747465146941,

4.2 out of 5 stars with 94 reviews
C.S. Osborne 12'' Wing Divider. Plots and measure curves. Ideal for scribing arcs, gauging dividing lines. The nuts on the wings are steel. Washers are of steel. The points are carefully hardened and every care is taken with the threads of the screws, which hold the legs in position on the wings. The springs are carefully tempered and are made for easy adjustment while holding the legs firmly. Made to U.S. Government Specifications. Forged steel. Fully polished. Made in USA. Max opening : 12''


C.S. Osborne & Co. SPUR Grommet Setter-Size 3 (217-3) & 72 QTY-BRASS Grommets & Spur Washers-Size 3 (13050)
C.S. Osborne & Co. SPUR Grommet Setter-Size 3 (217-3) & 72 QTY-BRASS Grommets & Spur Washers-Size 3 (13050)
By C. S. Osborne & Co.
In Stock
$104.29

mpn: 13250-13050, ean: 0611138450959,

4.3 out of 5 stars with 20 reviews
You will receive the following: 1 - C.S.Osborne No. 217-3 Grommet Setter ( MPN # 13250) . 72 QTY - C.S.Osborne & Co. No. G2-3- BRASS Spur Grommets & Washers size 3 grommets. Size 3 rolled rimmed grommets and spured washers have a 15/32'' diameter hole when set in, 0.970'' out side diameter, and 0.255'' Length under flange . For best results in setting Osborne rolled rimmed grommets and spured washers, , use an Osborne No. 500-0A hole punch (Cutter Not included)This Kit Includes: No. 217 -3 spur


50 QTY-C. S. Osborne & Co.-No. N1-4-NICKEL Grommets & Plain Washers,size 4. MPN# 13122
50 QTY-C. S. Osborne & Co.-No. N1-4-NICKEL Grommets & Plain Washers,size 4. MPN# 13122
By C. S. Osborne & Co.
In Stock
$15.10

mpn: 13122-B, ean: 0611138447089,

4.1 out of 5 stars with 14 reviews
50 QTY - C.S.Osborne & Co. No. N1-4 - NICKEL Grommets & Plain Washers size 4 grommets. Size 4 grommets have a 1/2'' diameter hole when set in, 1.062'' out side diameter, and 0.374'' Length under flange . For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch not included and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. (Cutter,Setter and Press Not included)C.S.Osborne & Co. No. N1-4. Crafted in the


C.S. Osborne 12 Sets Brass Grommets & Spur Washers #G2-6 (3/4'' Hole)
C.S. Osborne 12 Sets Brass Grommets & Spur Washers #G2-6 (3/4" Hole)
By C.S. Osborne
In Stock
$20.99

mpn: G2-6-A, ean: 0747465144480,

4.4 out of 5 stars with 88 reviews
C.S. Osborne Set of 12 Brass Grommets And Spur Washers. Brass material with brass finish grommets and washers. You will receive 12 grommets and 12 spur washers. Made in USA. Size : 6 Diameter of hole when set : 3/4'' Set these grommets with one of the following tools: C.S. Osborne Plain Washer Grommet Setter, C.S. Osborne Grommet Kits or Press-N-Snap Tool. Punch holes before setting grommets with one of the following tools: C.S. Osborne Drive Hole Punch, C.S. Osborne Revolving Hole Punch or


C.S. Osborne Spur Grommet Setting Die #217-5 (Size 5) Made In USA
C.S. Osborne Spur Grommet Setting Die #217-5 (Size 5) Made In USA
By C.S. Osborne
In Stock
$61.00
$50.00
You Save: 18%

mpn: 217-5, ean: 0747465144817,

4.8 out of 5 stars with 67 reviews
C.S. Osborne Spur Grommet Setting Die. Sets rolled rim grommets & spur washers. Osborne grommeting dies and grommet hole cutters are numbered to correspond with standard size grommets. The dies are guaranteed to set the proper size and style grommets. Properly machined and hardened. The finest industrial grommet dies made. Made in USA. Sets rolled rim grommets and washers For grommet size 5 Properly machined and hardened The finest industrial grommet dies made Grommet dies and cutters should be


50 QTY-C.S. Osborne - No.G1-2 BRASS Grommets & Plain Washers,size 2. MPN#13018
50 QTY-C.S. Osborne - No.G1-2 BRASS Grommets & Plain Washers,size 2. MPN#13018
By C. S. Osborne & Co.
In Stock
$12.99

mpn: 13018-B, ean: 0611138449144,

4.8 out of 5 stars with 9 reviews
50 QTY - C.S.Osborne & Co. No. G1-2 - BRASS Grommets & Plain Washers size 2 grommets. Size 2 grommets have a 3/8'' diameter hole when set in, 0.835'' out side diameter, and 0.215'' Length under flange . For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch not included and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. (Cutter,Setter and Press Not included)C.S.Osborne & Co. No. G1-2. Crafted in the


50 QTY-C. S. Osborne & Co.-No. N1-5-NICKEL Grommets & Plain Washers,size 5. MPN# 13124
50 QTY-C. S. Osborne & Co.-No. N1-5-NICKEL Grommets & Plain Washers,size 5. MPN# 13124
By C. S. Osborne & Co.
In Stock
$24.05

mpn: 13124-B, ean: 0602401917248,

4.8 out of 5 stars with 104 reviews
50 QTY - C.S.Osborne & Co. No. N1-5 - NICKEL Grommets & Plain Washers size 5 grommets. Size 5 grommets have a 5/8'' diameter hole when set in, 1.205'' out side diameter, and 0.330'' Length under flange . For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch not included and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. (Cutter,Setter and Press Not included)C.S.Osborne & Co. No. N1-5. Crafted in the


50 QTY-C. S. Osborne & Co.-No. N1-2-NICKEL Grommets & Plain Washers,size 2. MPN# 13118
50 QTY-C. S. Osborne & Co.-No. N1-2-NICKEL Grommets & Plain Washers,size 2. MPN# 13118
By C. S. Osborne & Co.
In Stock
$13.49

mpn: 13118-B, ean: 0602401917040,

4.6 out of 5 stars with 85 reviews
50 QTY - C.S.Osborne & Co. No. N1-2 - NICKEL Grommets & Plain Washers size 2 grommets. Size 2 grommets have a 3/8'' diameter hole when set in, 0.835 '' out side diameter, and 0.215'' Length under flange . For best results in setting our plain rim grommets and washers, use an Osborne No. 500 hole punch not included and an Osborne No. 216 setting die with corresponding sizes. Also can be set using W-1 & W-3 Machines. (Cutter,Setter and Press Not included)C.S.Osborne & Co. No. N1-2. Crafted in the


C.S. Osborne & Co. No. 500-00A - Grommet Hole Cutter, 3/16'' dia. MPN #51610
C.S. Osborne & Co. No. 500-00A - Grommet Hole Cutter, 3/16" dia. MPN #51610
By C. S. Osborne & Co.
In Stock
$32.00
$28.99
You Save: 9%

mpn: 51610, ean: 0611138449830,

4.9 out of 5 stars with 115 reviews
C.S. Osborne & Co. No. 500-00A - Grommet Hole Cutter, 3/16'' dia. (51610) C.S.Osborne & Co. No. 500-00A creates a precise 3/16'' hole . The ideal companion tool to the C.S.Osborne No. 216-00 Grommet Setter for setting perfect Size 00 Plain rimmed grommets. Plain Size 00 grommets have a 3/16'' hole diameter.C.S.Osborne & Co. No. 500-00A. Crafted in the USA of hardened Steel for superiour performance. Use with corresponding sizes of grommets and setting dies. This cutter can be used with Size 00


C.S. Osborne & Co. No. 500-4A - Grommet Hole Cutter, 1/2'' dia. MPN #51620
C.S. Osborne & Co. No. 500-4A - Grommet Hole Cutter, 1/2" dia. MPN #51620
By C. S. Osborne & Co.
In Stock
$33.24

mpn: 51620, ean: 0611138456043,

4.5 out of 5 stars with 28 reviews
C.S. Osborne & Co. No. 500-4A - Grommet Hole Cutter, 1/2'' dia. (51620) C.S.Osborne & Co. No. 500-4A creates a precise 1/2'' hole . The ideal companion tool to the C.S.Osborne No. 216-4 Grommet Setter for setting perfect Size 00 Plain rimmed grommets. Plain Size 4 grommets have a 1/2'' hole diameter.C.S.Osborne & Co. No. 500-4A. Crafted in the USA of hardened Steel for superiour performance. Use with corresponding sizes of grommets and setting dies. This cutter can be used with Size 4 Plain



Viewing Page 1 of 3

View more products in Hardware.
Feel free to Browse Our Catalog.



Privacy Policy / Terms of Service / Accessibility Statement
© 2019 - chatcentralhuron.com. All Rights Reserved.